Spring is coming...

Well with another foot of snow coming Friday it is getting hard to think that spring is here and with it comes riding your bike again. Before you jump on it for the first time this year do yourself a little favor and check the bike over. I always like to go over a few things before that first ride. Before you even start up check the tires for dry cracks and under inflation. Next up go through your lights. After this I give the brakes a squeeze and make sure the pads have plenty of meat. Next make sure you have oil in the tank and trans. And primary. After this fresh gas and a little fuel treatment and you should be off. If you ever have any questions call your local shop and schedule a check up!
Spring services starting at $45.00

- Posted using BlogPress from my iPhone

Worth the wait

Just got these wheels back, when they left they were rusty pieces of shit!



- Posted using BlogPress from my iPhone

Part needed

I am looking for a rear caliper to fit a xs 650 any help would be great

- Posted using BlogPress from my iPhone

Summer hours

Stop by the shop m-f 9-5 and sat 9-3 for all you service, parts and custom needs!


- Posted using BlogPress from my iPhone

Hoodies are in!

If you are local swing by open today till 3:00 or call to order 35.00 plus ship


- Posted using BlogPress from my iPhone

Battery Box

Hold a ytx7l-bs nice for kickstart bikes


- Posted using BlogPress from my iPhone

Coming Soon

New design for the CSC hoodies. Should be in next week. Please email if you are interested for pre-buy info@chopshopcycles.com

Finished Doninator Frame Modification

Step 4

One everything is fit just final weld. Remember you can take measurements off of the motor mounts to the rear axle to make sure everything is square. Take you r time and it will look nice. If you have any questions please feel free to contact us.

Part 3

Here is a picture of the Chop Shop Cycles Hardtail ready to go.
Fish mouthing the up posts to ft the hardtail.
Locating the bottom rails to the old frame.
It is always easier to grind a little at a time. Fitting the tail section with this method is not an exact science, we have found that different years of XS's are different and we can't tell you just where to cut.
This is how the bottom lays in. The slugs will go in the frame in the location the directions say, you just need to fit the up post to this section by fish mouthing it also.